To control odours and bacteria in Drains, Septic tanks and Bio cycles.
USES & METHODS
ODOUR CONTROL: Dilute 1 part Odour Eliminator with 50 parts cold water and spray to destroy odours in rubbish bins, toilets,
kennels etc. To remove odours from carpets, apply liberally, leave 5-10 minutes, then dab dry.
CLEANING; Dilute 1 part Odour Eliminator with 25 parts cold water for household cleaning. Spray on, leave for a few minutes, then rinse off. Suitable for use on showers, floors, sinks, tiles, windows, BBQs and all other hard surfaces.
SEPTIC SYSTEMS: To remove odours and blockages, flush 1 litre of Odour Eliminator in the toilet. Continue to add 25mls per person to the system weekly, via toilet or drains.
ABSORPTION TRENCHES: For trench blockages and odours; flush 1 litre of Odour Eliminator down the toilet or drains, follow up by adding 150ml to the system per week via toilet or drains. A minimum of 3 litres will need to be added over 3-4 months to unblock trenches.
GREYWATER/GREASE TRAPS; To reduce build up and odour, add 100mls of Odour Eliminator followed by 1 litre of cold water per week. For best results, add small amount each night. Prior to first application, flush grease trap and line with cold water.
DRAINS: To remove blockages and destroy odours, add 50mls of Odour Eliminator, followed by 1 litre of cold water, to affected drain daily until blockage cleared and odour gone.
If swallowed DO NOT induce vomiting, give a glass of water and seek medical advice. If skin contact occurs, remove contaminated clothing and wash skin thoroughly. If in eyes, hold eyes open and flood with water for at least 15 minutes and see a doctor.
No specific regulatory requirements apply.
TRANSPORT & HANDLING:
Not classified as Dangerous Goods according to the criteria of the Australian Dangerous Goods Code, sixth edition.
Treat as non hazardous material, prevent from entering waterways. For more details refer to MSDS